The main raw material of semi-impregnated labor protection gloves is natural latex, which is processed from rubber. It is safe and convenient for most people. However, people with latex allergies must avoid using it, because natural latex is the source of allergies for such people. It is widely used in food processing, electronics and other industries, and has gradually become an indispensable thing in people's daily life and work.
The semi-dipped labor protection gloves are first sliced with a rubber mixer, and then sent to the sol tank to mix the sol with gasoline. After the sol is emulsified and modulated, it is pumped to the latex intermediate tank. The rubber solution dissolved in gasoline is fed from the top of the distillation tower, and is heated and distilled by steam. The light component gasoline is heated into a gas phase. The gasoline gas is mixed and cooled by cold water in the oil-air cooler, and the oil-water mixture goes to the oil-water separator and the oil-water layer. , The upper layer of gasoline is recovered, and the lower water is pumped to the cooling water tower for cooling. After cooling, the gas gasoline in the distillation tower is cooled. The latex of the distillation tower is sent to the latex mixing cylinder under its own pressure for stirring, and after modulation, it is sent to the centrifuge to separate the glove material latex. After toning and filtering, set aside.
In the production process of latex, the most important thing is the ratio of latex. The semi-dipped labor protection glove model is first cleaned with acid and alkali and washed with water. The washed model is first immersed in hot water and heated until it is dipped in a coagulant and dried for dipping. After dipping, it is sent to the oven for preliminary drying, adding fiber inner sleeve, flushing hot water and then sending to the oven for vulcanization, drying and forming. After the gloves are demolded, they are inflated, checked, shaped at low temperature, dried at medium temperature, washed with water, dehydrated, dried, and then packed and sent to the finished product warehouse. Semi-dipped labor protection gloves are produced. Although the process is simple, the specific operation still requires the attention of the production workers, so as to produce products that consumers can rest assured.