Off-road Cycling Gloves
Product Introduction
A good off-road cycling glove is like an extension of a cyclist's hands. It must provide precise feel for braking and gripping, while also protecting fingers from tree roots, rocks, and falls. Designed based on real rider feedback: ergonomic padding effectively disperses shock and protects sensitive areas; silicone-printed patterns ensure stability on wet grips; and abrasion-resistant overlays prevent slipping. A breathable back and elasticated areas effectively control heat and sweat, allowing cyclists to focus on the ride rather than preparing their gear. Whether competing, riding long distances on remote trails, or embarking on a winter bike touring, these gloves are the perfect choice.
Key Features & Advantages
Precision Feel: Thin palms and ergonomic pre-curved fingers keep lever and brake feel intact.
Secure Grip: Silicone or textured PU prints maintain traction in wet and muddy conditions.
Impact Protection: Low-profile pads and optional TPR guards reduce sting from hits without sacrificing control.
Breathability: Laser perforations, mesh backs, and moisture-wicking liners prevent clamminess on long climbs.
Durability Where It Counts: Reinforced thumb crotch, double-stitch seam, and abrasion patches on high-wear zones.
Rapid Drying & Easy Care: Synthetic constructions that withstand ride-after-ride washing for busy rental fleets or guides.
Versatile Options: Lightweight summer gloves to insulated, windproof versions for cold-climate trail riding.
How to Use
Select the right fit - fingers should reach the fingertips without excess fabric.
Fasten the wrist closure snugly to prevent glove movement during technical maneuvers.
Clean after muddy rides: rinse, mild detergent, air dry; follow label instructions.
Inspect seams and palm print before heavy rides - replace if padding compresses or stitching comes loose.
Use short-finger models for cross-country and full-finger models for technical descents or protection from brush.
Product Parameters
| Spec | Typical Options |
|---|---|
| Constructions | Full-finger MTB gloves; short cuff & long cuff versions; youth sizes |
| Palm material | Synthetic leather (Clarino®), silicone print, double-layer suede patch |
| Back material | Breathable mesh, 4-way stretch polyester, neoprene cuff |
| Protection | Low-profile EVA or gel palm padding; TPR knuckle guards on select models |
| Fingertips | Reinforced, touchscreen conductive index & thumb |
| Closure | Velcro wrist strap or pull-on elastic cuff |
| Sizes | XS, S, M, L, XL, XXL |
| Weight | 25–45 g per glove (model dependent) |
| Colors/Prints | Solid, hi-vis, camo, custom prints available |
| Care | Machine-washable (per care label) for synthetic models |
| Certifications | EN 388 optional for reinforced models; CE marking on protective elements where applicable |
| MOQ | 300–1,000 pairs per design |
| Sample lead time | 3–10 days (stock); 7–18 days (custom) |
| Production lead time | 18–40 days after sample approval |
Production Process
Applications (Industries)
Applications (Who Uses Them)
Mountain bikers (trail, all-mountain, enduro)
BMX and pump-track riders
Bike rental fleets and guiding services
Adventure cycling and bike-packing riders
Youth cycling programs and schools
Bike shops and retail chains
Environmental & Sustainability Considerations
Recycled yarns: Back panels and liners available in recycled polyester.
Water-based coatings: Grip prints and PU coatings offered in low-VOC water-based formulas.
Long-life design: Durable construction reduces replacement rate and waste.
Eco-packaging: Recyclable boxes and minimal plastic options for retail lines.
Customization & OEM/ODM Services
OEM / ODM Services
Pattern & fit development to match the target rider's hand shapes.
Material tailoring: choose palm thickness, padding density, and back-panel stretch.
Performance targets: specify grip, abrasion class, and intended seasonal use for sample tuning.
Private Label
Logo placement on cuff or backhand, custom woven labels, and branded hangtags.
Colorways and print design to match brand identity or seasonal collections.
Label Printing
Multilingual care labels, UPC/QR codes, and custom instruction cards (fit guide, care tips).
Packaging
Packaging options: retail blister, full-color box, or eco kraft sleeve for boutique shops.
Factory Capability & Quality Assurance
Production setup: knitted & woven fabric lines, PU dip and silicone print capability, multi-head sewing lines, and laser cutting for precision.
QC: raw material inspection, in-line seam checks, grip adhesion tests, and final AQL sampling with photographic records.
Testing coordination: third-party labs for EN/ANSI tests and abrasion grading available upon request.
Scalability: ability to run small bespoke batches for pro teams and large wholesale orders for retail seasons.
MOQ, Sampling Time & Fees
MOQ: usually 300–1,000 pairs per design; smaller pilot runs negotiable for new product launches.
Samples: stock models usually dispatched within 3–5 days; custom samples 7–18 days.
Sample fees: charged for custom colorways or protective insert tooling; often refundable on order.
Sampling & Material/Structure Services
Send or request palm material swatches (synthetic leather grades, suede variants) and back panel fabrics for a tactile check.
Prototype cycles include fit set, grading check, and field ride trials with rider feedback integrated into revisions.
Packaging, Logistics & Delivery
01
Packing
pair polybag > inner carton > master carton; retail boxes for shelf display.
02
Shipping modes
sea freight for bulk; air/express for urgent replenishment or fair samples.
03
Lead times
Production 18–40 days post sample approval; sea transit 2–6 weeks, depending on destination.
Engineered for grip and feel - marketed to riders who demand control.
Durable yet lightweight - ideal for rental programs where durability and washability matter.
Design flexibility - easy to adapt to team kits, retail lines, or promotional ranges.
"Brakes feel the same with these gloves on - love the thin palm."
"The silicone print saved a crash - my hands didn't slip when the trail got wet."
"After a season of rentals, the gloves still look good - seams held up well."
Experience: long-standing supplier for cycling brands, rental companies, and pro teams.
Process: digital patterning → laser cutting → printing/dip → assembly → QC → packing.
Support: artwork, tech-pack, and fit templates provided to speed up OEM launches.
Certifications & Safety Systems
Factory quality: ISO 9001 management system.
Product testing: EN388 mechanical testing and abrasion reports supported for reinforced models.
Chemical compliance: REACH documentation and low-VOC options for coatings.
Representative Customer Cases
European rental fleet: private-label off-road gloves supplied for year-round rentals; 18-month program showed 40% lower replacement costs compared with previous supplier.
Pro MTB team: customized gloves with sponsor logos and reinforced thumbs; team reported improved braking confidence and ordered an expanded range.
Company Profile
We are a specialized glove manufacturer with decades of experience in sports and protective handwear. Our capabilities span design, prototyping, mass production, and global logistics - delivering off-road cycling gloves to brands, retailers, and rental operators worldwide. We combine rider input with technical manufacturing to produce gloves riders actually want to wear.
FAQ
Q1: How should I size off-road cycling gloves?
A: Measure hand circumference around the knuckles (exclude thumb). If between sizes, choose the larger for comfort or the smaller for a more precise feel.
Q2: Can these gloves handle heavy mud and repeated washing?
A: Synthetic palm models with silicone prints are designed for frequent washing and rapid drying; follow care label instructions.
Q3: Do you offer youth sizes or women's specific cuts?
A: Yes - we provide gendered patterns and youth grading for junior ranges.
Q4: Are touchscreen fingertips reliable when wet?
A: Conductive fingertips work in most conditions, but functionality can be reduced in heavy water immersion - recommend testing for your use case.
Q5: Can I add team or sponsor logos?
A: Yes - embroidery, heat transfers, and silicone patches are available for private-label and team kits.
Q6: What's the best option for colder rides?
A: Choose insulated or windproof models with fleece liners and water-resistant backs.
Q7: Can you support seasonal color trends?
A: Yes - custom dye runs and limited seasonal prints can be scheduled with lead time.
Our Certificate
Labor protection gloves appear patent.
A kind of fishing protective gloves- utility model patent certificate
A motorcycle glove with increased adhesion, Utility Model Patent Certificate
A high-speed and stable special glove machine-utility model patent certificate
Contact Us
Ready to develop a private-label off-road glove, outfit your rental fleet, or stock a new retail range? Send your preferred model brief (target rider, size mix, desired materials, and order volume) and we'll provide recommended constructions, sample timelines, costing, and a launch plan.
📧 Email Us: [anson.lee@luqi.biz]
📞 Call Us: [+8613502228011]
🌐 Visit Our Website: [www.luqigloves.com/]
Hot Tags: off-road cycling gloves, China off-road cycling gloves suppliers, manufacturers, factory, Breathable Mtb Biking Gloves, Bicycle Glove Breathable Biking, Bicycle Glove, Bicycle Half Gloves, Half Finger Gloves Bicycle
Send Inquiry
